Metal service center network across Europe

I-beam HEA HEB IPE IPN S235/S275/S355 EN 10025

Products: 12

L-beam, I-bars

I-beam 80 INP S235/275JR + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 80 INP S355J2 + M EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 80 INP S235JR + M EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 80 INP S355J2 + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 10 S235/S275/S355

The item is in stock

756.15 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 IPE S235/S275/S355

The item is in stock

756.15 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 HEB S235/275JR + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 HEB S235JR + M EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 INP S235/275JR + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 INP S355J2 + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 HEA S235/S275JR + AR EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

L-beam, I-bars

I-beam 100 HEA S235JR + M EN10025

The item is in stock

812.52 EUR
ton Brutto

Buy

Buy Structural Steel I-Beams at a Competitive Price

UTMK provides a comprehensive selection of hot-rolled structural steel I-beams, including HEA, HEB, IPE, and IPN profiles, alongside GOST-certified sections. We supply products in S235, S355, and 09G2S grades according to EN 10025 and GOST 26020 standards. Available parameters range from 100mm to 1000mm in height. We offer self-pickup from warehouses in Europe (Poland, Bulgaria) and fast delivery across the EU.

Purchase I-beams according to GOST 27772-2015, GOST 19425-74, GOST 26020.

Standard I-beams feature a slope on the inner flange surfaces and are designated by a number corresponding to their height in centimeters. The range includes profiles from No. 10 to No. 60. The ratio of wall thickness to beam height reaches 1/55. The thinner the wall, the more efficient the beam's cross-section performs under bending loads. The following types of steel I-beams are available:

I-beams with sloped inner flanges (GOST 8239-89)
Special steel I-beams (GOST 19425-74):
M – for overhead tracks
Sh (S) – for mine shaft reinforcement
I-beams with parallel flange edges (GOST 26020-83):
B – Normal
Sh – Wide-flange
K – Column
D – Additional series (DB – Normal, DSh – Wide-flange)
Beams produced according to manufacturers' technical specifications (STO ASCHM 20-93, TU 14-2-336-78)

Steel I-Beams with Sloped Inner Flanges (GOST 8239-89)

This standard establishes the range of hot-rolled steel I-beams where the slope of the inner flanges must be between 6% and 12%. Based on rolling precision, beams are classified as high precision (B) or ordinary precision (V). Profiles are manufactured in lengths from 4m to 12m and are categorized by length as fixed, multiple of fixed, or random length.

The range of steel I-beams with sloped inner flange surfaces by GOST 8239-89.

Size	Index	Height, mm	Flange width, mm	Wall thickness, mm	Flange thickness, mm	Mass per 1 m, kg	Meters in 1 t, m
10		100	55	4.5	7.2	9.456	105.7
12		120	64	4.8	7.3	11.54	86.62
14		140	73	4.9	7.5	13.68	73.09
16		160	81	5	7.8	15.89	62.94
18		180	90	5.1	8.1	18.35	54.5
18	A	180	100	5.1	8.3	19.92	50.2
20		200	100	5.2	8.4	21.04	47.53
22		220	110	5.4	8.7	24.04	41.60
24		240	115	5.6	9.5	27.34	36.57
27		270	125	6	9.8	31.53	31.71
30		300	135	6.5	10.2	36.48	27.41
33		330	140	7	11.2	42.25	23.67
36		360	145	7.5	12.3	48.55	20.6
40		400	155	8.3	13	56.96	17.56
45		450	160	9	14.2	66.5	15.04
50		500	170	10	15.2	78.64	12.72
55		550	180	11	16.5	92.66	10.79
60		600	190	12	17.8	108	9.263

Special Steel I-Beams (GOST 19425-74)

This standard applies to hot-rolled beams for overhead tracks (M), reinforcement of mine shafts (S), and channels for the automotive industry:

For Series M beams, the slope of the inner flange surfaces is 12%.
For Series S beams, the slope of the inner flange surfaces is 16%.

By rolling precision, profiles are divided into high precision (A) and ordinary precision (V). They are produced in lengths from 4m to 13m. According to GOST 19425-74, they are categorized as fixed length, multiple of fixed length, or random length. Residuals are considered profiles with a length of at least 3m.

The range for special steel I-beams by GOST 19425-74.

Size	Index	Height, mm	Flange width, mm	Wall thickness, mm	Flange thickness, mm	Weight per 1 m, kg	Meters in 1 t, m
14	С/S	140	80	5.5	9.1	16.9	59.17
20	С/S	200	100	7	11.4	27.9	35.84
20	Са/Sa	200	102	9	11.4	31.1	32.15
22	С/S	220	110	7.5	12.3	33.1	30.21
27	С/S	270	122	8.5	13.7	42.8	23.36
27	Са/Sa	270	124	10.5	13.7	47	21.28
36	С/S	360	140	14	15.8	71.3	14.03
18	М/M	180	90	7	12	25.8	38.76
24	М/M	240	110	8.2	14	38.3	26.11
30	М/M	300	130	9	15	50.2	19.92
36	М/M	360	130	9.5	16	57.9	17.27
45	М/M	450	150	10.5	18	77.6	12.89

Hot-Rolled I-Beams with Parallel Flange Edges (GOST 26020-83)

This standard covers hot-rolled steel beams with heights from 100mm to 1000mm and flange widths from 55mm to 400mm. Depending on the size ratio and application conditions, I-beams are divided into types: B (Normal), Sh (Wide-flange), and K (Column). They are produced in lengths from 6m to 24m. Short lengths (residuals) are defined as beams not less than 3m for linear density up to 20 kg/m, or 4m for density over 20 kg/m.

Reducing the load-bearing weight of the entire structure beneficially affects the project's cost, which is achievable using steel I-beams. Visually, this element resembles a bar, positioned horizontally or at an angle, with lengths up to 12m (for standard sections) and heights up to 100cm. From an application perspective, the steel I-beam is universal: for reinforcing mine tracks, assembling span structures, constructing floor ceilings, and building houses using panel technology.

The assortment for I-beams with parallel flange surfaces determined by GOST 26020-83.

Size	Index	Height, mm	Flange width, mm	Wall thickness, mm	Flange thickness, mm	Mass per 1 m, kg	Meters in 1 t, m
10	Б1/B1	100	55	4.1	5.7	8.104	123.4
12	Б1/B1	117.6	64	3.8	5.1	8.658	115.5
12	Б2/B2	120	64	4.4	6.3	10.37	96.43
14	Б1/B1	137.4	73	3.8	5.6	10.51	95.12
14	Б2/B2	140	73	4.7	6.9	12.89	77.55
16	Б1/B1	157	82	4	5.9	12.7	78.74
16	Б2/B2	160	82	5	7.4	15.77	63.4
18	Б1/B1	177	91	4.3	6.5	15.37	65.07
18	Б2/B2	180	91	5.3	8	18.8	53.2
20	Б1/B1	200	100	5.6	8.5	22.36	44.72
23	Б1/B1	230	110	5.6	9	25.83	38.71
26	Б1/B1	258	120	5.8	8.5	27.96	35.77
26	Б2/B2	261	120	6	10	31.16	32.09
30	Б1/B1	296	140	5.8	8.5	32.9	30.39
30	Б2/B2	299	140	6	10	36.64	27.29
35	Б1/B1	346	155	6.2	8.5	38.88	25.72
35	Б2/B2	349	155	6.5	10	43.31	23.09
40	Б1/B1	392	165	7	9.5	48.08	20.8
40	Б2/B2	396	165	7.5	11.5	54.72	18.27
45	Б1/B1	443	180	7.8	11	59.84	16.71
45	Б2/B2	447	180	8.4	13	67.47	14.82
50	Б1/B1	492	200	8.8	12	72.98	13.7
50	Б2/B2	496	200	9.2	14	80.73	12.39
55	Б1/B1	543	220	9.5	13.5	88.99	11.24
55	Б2/B2	547	220	10	15.5	97.92	10.21
60	Б1/B1	593	230	10.5	15.5	106.2	9.418
60	Б2/B2	597	230	11	17.5	115.6	8.65
70	Б1/B1	691	260	12	15.5	129.3	7.732
70	Б2/B2	697	260	12.5	18.5	144.2	6.937
80	Б1/B1	791	280	13.5	17	159.5	6.269
80	Б2/B2	798	280	14	20.5	177.9	5.622
90	Б1/B1	893	300	15	18.5	194	5.155
90	Б2/B2	900	300	15.5	22	213.8	4.676
100	Б1/B1	990	320	16	21	230.6	4.336
100	Б2/B2	998	320	17	25	258.2	3.873
100	Б3/B3	1006	320	18	29	285.7	3.5
100	Б4/B4	1013	320	19.5	32.5	314.5	3.18
20	Ш1/Sh1	193	150	6	9	30.58	32.71
23	Ш1/Sh1	226	155	6.5	10	36.17	27.65
26	Ш1/Sh1	251	180	7	10	42.68	23.43
26	Ш2/Sh2	255	180	7.5	12	49.24	20.31
30	Ш1/Sh1	291	200	8	11	53.62	18.65
30	Ш2/Sh2	295	200	8.5	13	60.95	16.41
30	Ш3/Sh3	299	200	9	15	68.29	14.64
35	Ш1/Sh1	338	250	9.5	12.5	75.1	13.32
35	Ш2/Sh2	341	250	10	14	82.22	12.16
35	Ш3/Sh3	345	250	10.5	16	91.29	10.95
40	Ш1/Sh1	388	300	9.5	14	96.05	10.41
40	Ш2/Sh2	392	300	11.5	16	111.1	8.999
40	Ш3/Sh3	396	300	12.5	18	123.4	8.106
50	Ш1/Sh1	484	300	11	15	114.4	8.741
50	Ш2/Sh2	489	300	14.5	17.5	138.7	7.212
50	Ш3/Sh3	495	300	15.5	20.5	156.4	6.396
50	Ш4/Sh4	501	300	16.5	23.5	174	5.746
60	Ш1/Sh1	580	320	12	17	142.1	7.036
60	Ш2/Sh2	587	320	16	20.5	176.9	5.654
60	Ш3/Sh3	595	320	18	24.5	205.5	4.866
60	Ш4/Sh4	603	320	20	28.5	234.2	4.27
70	Ш1/Sh1	683	320	13.5	19	169.9	5.887
70	Ш2/Sh2	691	320	15	23	197.6	5.062
70	Ш3/Sh3	700	320	18	27.5	235.4	4.249
70	Ш4/Sh4	708	320	20.5	31.5	268.1	3.73
70	Ш5/Sh5	718	320	23	36.5	305.9	3.269
20	К1/K1	195	200	6.5	10	41.47	24.11
20	К2/K2	198	200	7	11.5	46.87	21.34
23	К1/K1	227	240	7	10.5	52.2	19.16
23	К2/K2	230	240	8	12	59.47	16.81
26	К1/K1	255	260	8	12	65.22	15.33
26	К2/K2	258	260	9	13.5	73.15	13.67
26	К3/K3	262	260	10	15.5	83.13	12.03
30	К1/K1	296	300	9	13.5	84.77	11.8
30	К2/K2	300	300	10	15.5	96.3	10.38
30	К3/K3	304	300	11.5	17.5	108.9	9.183
35	К1/K1	343	350	10	15	109.7	9.117
35	К2/K2	348	350	11	17.5	125.9	7.944
35	К3/K3	353	350	13	20	144.5	6.919
40	К1/K1	393	400	11	16.5	138	7.248
40	К2/K2	400	400	13	20	165.6	6.039
40	К3/K3	409	400	16	24.5	202.3	4.942
40	К4/K4	419	400	19	29.5	242.2	4.129
40	К5/K5	431	400	23	35.5	291.2	3.434

European Wide-Flange I-Beams (HEA)

Featuring wide, parallel flanges, they offer excellent resistance to bending moments relative to their weight. This makes them the primary choice for building frames where structural efficiency and weight optimization are critical for the foundation and overall cost-effectiveness.

HEA type beams (lightweight series) according to EN 10025 and EN 10034 standards.

Size	Index	Mass, kg/m	Height, mm	Flange width, mm	Web thickness, mm	Flange thickness, mm	Radius, mm	Section area, mm2x10²	hi, mm	d, mm	Bolt (Ø)	pmin, mm	pmax, mm	AL, m2/m	AG, m2/t
100	АА/AA	12.2	91	100	4.2	5.5	12	15.6	80	56	M 10	54	58	0.553	45.17
100	А/A	16.7	96	100	5	8	12	21.2	80	56	M 10	54	58	0.561	33.68
100	Б/B	20.4	100	100	6	10	12	26.0	80	56	M 10	56	58	0.567	27.76
100	С/C	30.9	110	103	9	15	12	39.3	80	56	M 10	59	61	0.593	19.23
100	М/M	41.8	120	106	12	20	12	53.2	80	56	M 10	62	64	0.619	14.82
120	АА/AA	14.6	109	120	4.2	5.5	12	18.6	98	74	M 12	58	68	0.669	45.94
120	А/A	19.9	114	120	5	8	12	25.3	98	74	M 12	58	68	0.677	34.06
120	Б/B	26.7	120	120	6.5	11	12	34.0	98	74	M 12	60	68	0.686	25.71
120	С/C	39.2	130	123	9.5	16	12	49.9	98	74	M 12	63	72	0.712	18.19
120	М/M	52.1	140	126	12.5	21	12	66.4	98	74	M 12	66	74	0.738	14.16
140	АА/AA	18.1	128	140	4.3	6	12	23.0	116	92	M 16	64	76	0.787	43.53
140	А/A	24.7	133	140	5.5	8.5	12	31.4	116	92	M 16	64	76	0.794	32.21
140	Б/B	33.7	140	140	7	12	12	43.0	116	92	M 16	66	76	0.805	23.88
140	С/C	48.2	150	143	10	17	12	61.5	116	92	M 16	69	79	0.831	17.22
140	М/M	63.2	160	146	13	22	12	80.6	116	92	M 16	72	82	0.857	13.56
160	АА/AA	23.8	148	160	4.5	7	15	30.4	134	104	M 20	76	84	0.901	37.81
160	А/A	30.4	152	160	6	9	15	38.8	134	104	M 20	78	84	0.906	29.78
160	Б/B	42.6	160	160	8	13	15	54.3	134	104	M 20	80	84	0.918	21.56
160	С/C	59.2	170	163	11	18	15	75.4	134	104	M 20	84	88	0.944	15.95
160	М/M	76.2	180	166	14	23	15	97.1	134	104	M 20	86	90	0.970	12.74
180	АА/AA	28.7	167	180	5	7.5	15	36.5	152	122	M 24	84	92	1.018	35.51
180	А/A	35.5	171	180	6	9.5	15	45.3	152	122	M 24	86	92	1.024	28.83
180	Б/B	51.2	180	180	8.5	14	15	65.3	152	122	M 24	88	92	1.037	20.25
180	С/C	69.8	190	183	11.5	19	15	89.0	152	122	M 27	92	96	1.063	15.22
180	М/M	88.9	200	186	14.5	24	15	113.3	152	122	M 24	94	98	1.089	12.25
200	АА/AA	34.6	186	200	5.5	8	18	44.1	170	134	M 27	96	100	1.130	32.62
200	А/A	42.3	190	200	6.5	10	18	53.8	170	134	M 27	98	100	1.136	26.89
200	Б/B	61.3	200	200	9	15	18	78.1	170	134	M 27	100	100	1.151	18.78
200	С/C	81.9	210	203	12	20	18	104.4	170	134	M 27	104	104	1.177	14.36
200	М/M	103	220	206	15	25	18	131.3	170	134	M 27	106	106	1.203	11.67
220	АА/AA	40.4	205	220	6	8.5	18	51.5	188	152	M 27	98	118	1.247	30.87
220	А/A	50.5	210	220	7	11	18	64.3	188	152	M 27	98	118	1.255	24.85
220	Б/B	71.5	220	220	9.5	16	18	91.0	188	152	M 27	100	118	1.270	17.77
220	С/C	94.1	230	223	12.5	21	18	119.9	188	152	M 27	104	122	1.296	13.77
220	М/M	117	240	226	15.5	26	18	149.4	188	152	M 27	108	124	1.322	11.27
240	АА/AA	47.4	224	240	6.5	9	21	60.4	206	164	M 27	104	138	1.359	28.67
240	А/A	60.3	230	240	7.5	12	21	76.8	206	164	M 27	104	138	1.369	22.70
240	Б/B	83.2	240	240	10	17	21	106.0	206	164	M 27	108	138	1.384	16.63
240	С/C	119	255	244	14	24.5	21	152.2	206	164	M 27	112	142	1.422	11.90
240	М/M	157	270	248	18	32	21	199.6	206	164	M 27	116	146	1.460	9.318
260	АА/AA	54.1	244	260	6.5	9.5	24	69.0	225	177	M 27	110	158	1.474	27.22
260	А/A	68.2	250	260	7.5	12.5	24	86.8	225	177	M 27	110	158	1.484	21.77
260	Б/B	93.0	260	260	10	17.5	24	118.4	225	177	M 27	114	158	1.499	16.12
260	С/C	132	275	264	14	25	24	168.4	225	177	M 27	118	162	1.537	11.63
260	М/M	172	290	268	18	32.5	24	219.6	225	177	M 27	122	166	1.575	9.133
280	АА/AA	61.2	264	280	7	10	24	78.0	244	196	M 27	110	178	1.593	26.01
280	А/A	76.4	270	280	8	13	24	97.3	244	196	M 27	112	178	1.603	20.99
280	Б/B	103	280	280	10.5	18	24	131.4	244	196	M 27	114	178	1.618	15.69
280	С/C	145	295	284	14.5	25.5	24	185.2	244	196	M 27	118	182	1.656	11.39
280	М/M	189	310	288	18.5	33	24	240.2	244	196	M 27	122	186	1.694	8.984
300	АА/AA	69.8	283	300	7.5	10.5	27	88.9	262	208	M 27	116	198	1.705	24.42
300	А/A	88.3	290	300	8.5	14	27	112.5	262	208	M 27	118	198	1.717	19.43
300	Б/B	117	300	300	11	19	27	149.1	262	208	M 27	120	198	1.732	14.80
300	С/C	177	320	305	16	29	27	225.1	262	208	M 27	126	204	1.782	10.08
300	М/M	238	340	310	21	39	27	303.1	262	208	M 27	132	208	1.832	7.699
320	АА/AA	74.2	301	300	8	11	27	94.6	279	225	M 27	118	198	1.740	23.43
320	А/A	97.6	310	300	9	15.5	27	124.4	279	225	M 27	118	198	1.756	17.98
320	Б/B	127	320	300	11.5	20.5	27	161.3	279	225	M 27	122	198	1.771	13.98
320	С/C	186	340	305	16	30.5	27	236.9	279	225	M 27	126	204	1.822	9.796
320	М/M	245	359	309	21	40	27	312.0	279	225	M 27	132	204	1.866	7.616
340	АА/AA	78.9	320	300	8.5	11.5	27	100.5	297	243	M 27	118	198	1.777	22.52
340	А/A	105	330	300	9.5	16.5	27	133.5	297	243	M 27	118	198	1.795	17.13
340	Б/B	134	340	300	12	21.5	27	170.9	297	243	M 27	122	198	1.810	13.49
340	М/M	248	377	309	21	40	27	315.8	297	243	M 27	132	204	1.902	7.670
360	АА/AA	83.7	339	300	9	12	27	106.6	315	261	M 27	118	198	1.814	21.67
360	А/A	112	350	300	10	17.5	27	142.8	315	261	M 27	120	198	1.834	16.36
360	Б/B	142	360	300	12.5	22.5	27	180.6	315	261	M 27	122	198	1.849	13.04
360	М/M	250	395	308	21	40	27	318.8	315	261	M 27	132	204	1.934	7.730
400	АА/AA	92.4	378	300	9.5	13	27	117.7	352	298	M 27	118	198	1.891	20.46
400	А/A	125	390	300	11	19	27	159.0	352	298	M 27	120	198	1.912	15.32
400	Б/B	155	400	300	13.5	24	27	197.8	352	298	M 27	124	198	1.927	12.41
400	М/M	256	432	307	21	40	27	325.8	352	298	M 27	132	202	2.004	7.835
450	АА/AA	99.7	425	300	10	13.5	27	127.1	398	344	M 27	120	198	1.984	19.89
450	А/A	140	440	300	11.5	21	27	178.0	398	344	M 27	122	198	2.011	14.39
450	Б/B	171	450	300	14	26	27	218.0	398	344	M 27	124	198	2.026	11.84
450	М/M	263	478	307	21	40	27	335.4	398	344	M 27	132	202	2.096	7.959
500	АА/AA	107	472	300	10.5	14	27	136.9	444	390	M 27	120	198	2.077	19.33
500	А/A	155	490	300	12	23	27	197.5	444	390	M 27	122	198	2.110	13.60
500	Б/B	187	500	300	14.5	28	27	238.6	444	390	M 27	124	198	2.125	11.34
500	М/M	270	524	306	21	40	27	344.3	444	390	M 27	132	202	2.184	8.079
550	АА/AA	120	522	300	11.5	15	27	152.8	492	438	M 27	122	198	2.175	18.13
550	А/A	166	540	300	12.5	24	27	211.8	492	438	M 27	122	198	2.209	13.29
550	Б/B	199	550	300	15	29	27	254.1	492	438	M 27	124	198	2.224	11.15
550	М/M	278	572	306	21	40	27	354.4	492	438	M 27	132	202	2.280	8.195
600	АА/AA	129	571	300	12	15.5	27	164.1	540	486	M 27	122	198	2.272	17.64
600	А/A	178	590	300	13	25	27	226.5	540	486	M 27	122	198	2.308	12.98
600	Б/B	212	600	300	15.5	30	27	270.0	540	486	M 27	126	198	2.323	10.96
600	М/M	285	620	305	21	40	27	363.7	540	486	M 27	132	200	2.372	8.308
600 x 337		337	632	310	25.5	46	27	429.2	540	486	M 27	138	202	2.407	7.144
600 x 399		399	648	315	30	54	27	508.5	540	486	M 27	142	208	2.450	6.137
650	АА/AA	138	620	300	12.5	16	27	175.8	588	534	M 27	122	198	2.369	17.17
650	А/A	190	640	300	13.5	26	27	241.6	588	534	M 27	124	198	2.407	12.69
650	Б/B	225	650	300	16	31	27	286.3	588	534	M 27	126	198	2.422	10.77
650	М/M	293	668	305	21	40	27	373.7	588	534	M 27	132	200	2.468	8.411
650 x 343		343	680	309	25	46	27	437.5	588	534	M 27	138	202	2.500	7.278
650 x 407		407	696	314	29.5	54	27	518.8	588	534	M 27	142	206	2.543	6.243
700	АА/AA	150	670	300	13	17	27	190.9	636	582	M 27	122	198	2.468	16.46
700	А/A	204	690	300	14.5	27	27	260.5	636	582	M 27	124	198	2.505	12.25
700	Б/B	241	700	300	17	32	27	306.4	636	582	M 27	126	198	2.520	10.48
700	М/M	301	716	304	21	40	27	383.0	636	582	M 27	132	200	2.560	8.513
700 x 352		352	728	308	25	46	27	448.6	636	582	M 27	138	200	2.592	7.359
700 x 418		418	744	313	29.5	54	27	531.9	636	582	M 27	142	206	2.635	6.310
800	АА/AA	172	770	300	14	18	30	218.5	734	674	M 27	130	198	2.660	15.51
800	А/A	224	790	300	15	28	30	285.8	734	674	M 27	130	198	2.698	12.03
800	Б/B	262	800	300	17.5	33	30	334.2	734	674	M 27	134	198	2.713	10.34
800	М/M	317	814	303	21	40	30	404.3	734	674	M 27	138	198	2.746	8.655
800 x 373		373	826	308	25	46	30	474.6	734	674	M 27	144	200	2.782	7.469
800 x 444		444	842	313	30	54	30	566.0	734	674	M 27	148	206	2.824	6.357
900	АА/AA	198	870	300	15	20	30	252.2	830	770	M 27	130	198	2.858	14.44
900	А/A	252	890	300	16	30	30	320.5	830	770	M 27	132	198	2.896	11.51
900	Б/B	291	900	300	18.5	35	30	371.3	830	770	M 27	134	198	2.911	9.99
900	М/M	333	910	302	21	40	30	423.6	830	770	M 27	138	198	2.934	8.824
900 x 391		391	922	307	25	46	30	497.7	830	770	M 27	144	200	2.970	7.604
900 x 466		466	938	312	30	54	30	593.7	830	770	M 27	148	204	3.012	6.464
1000	АА/AA	222	970	300	16	21	30	282.2	928	868	M 27	132	198	3.056	13.80
1000 x 249		249	980	300	16.5	26	30	316.8	928	868	M 27	134	194	3.080	12.37
1000	А/A	272	990	300	16.5	31	30	346.8	928	868	M 27	132	198	3.095	11.37
1000	Б/B	314	1000	300	19	36	30	400.0	928	868	M 27	134	198	3.110	9.905
1000	М/M	349	1008	302	21	40	30	444.2	928	868	M 27	138	198	3.130	8.978
1000 x 393		393	1016	303	24.4	43.9	30	500.2	928	868	M 27	142	198	3.140	8.010
1000 x 415		415	1020	304	26	46	30	528.7	928	868	M 27	144	198	3.150	7.600
1000 x 438		438	1026	305	26.9	49	30	556.0	928	868	M 27	146	198	3.170	7.250
1000 x 494		494	1036	309	31	54	30	629.1	928	868	M 27	148	204	3.190	6.470
1000 x 584		584	1056	314	36	64	30	743.7	928	868	M 27	154	208	3.240	5.560

European Standard I-Beams (IPE 60 - 600)

Their cross-sectional geometry is optimized for vertical bending loads. They are widely used as rafters, floor joists, and main structural members in industrial and civil engineering projects requiring high rigidity.

IEuropean I-beams with parallel flange surfaces, standardized under EN 10034 and DSTU 8768.

Size	Index	Mass (G), kg/m	Height (h), mm	Width (b), mm	Web (tw), mm	Flange (tf), mm	Radius (r), mm	Area (A), mm2x10²	hi, mm	d, mm	Bolt (Ø)	pmin, mm	pmax, mm	AL, m2/m	AG, m2/t
80	AA/AA	4.9	78	46	3.2	4.2	5.0	6.31	69.6	59.6	-	-	-	0.325	65.62
80	A/A	5.0	78	46	3.3	4.2	5.0	6.38	69.6	59.6	-	-	-	0.325	64.90
80		6.0	80	46	3.8	5.2	5.0	7.64	69.6	59.6	-	-	-	0.328	54.64
100	AA/AA	6.7	97.6	55	3.6	4.5	7.0	8.56	88.6	74.6	-	-	-	0.396	58.93
100	A/A	6.9	98	55	3.6	4.7	7.0	8.8	88.6	74.6	-	-	-	0.397	57.57
100		8.1	100	55	4.1	5.7	7.0	10.3	88.6	74.6	-	-	-	0.400	49.33
120	AA/AA	8.4	117	64	3.8	4.8	7.0	10.7	107.4	93.4	-	-	-	0.470	56.26
120	A/A	8.7	117.6	64	3.8	5.1	7.0	11.0	107.4	93.4	-	-	-	0.472	54.47
120		10.4	120	64	4.4	6.3	7.0	13.2	107.4	93.4	-	-	-	0.475	45.82
140	AA/AA	10.1	136.6	73	3.8	5.2	7.0	12.8	126.2	112.2	-	-	-	0.546	54.26
140	A/A	10.5	137.4	73	3.8	5.6	7.0	13.4	126.2	112.2	-	-	-	0.547	52.05
140		12.9	140	73	4.7	6.9	7.0	16.4	126.2	112.2	-	-	-	0.551	42.70
160	AA/AA	12.1	156.4	82	4.0	5.6	7.0	15.4	145.2	131.2	-	-	-	0.621	50.40
160	A/A	12.7	157	82	4.0	5.9	9.0	16.2	145.2	127.2	-	-	-	0.619	48.70
160		15.8	160	82	5.0	7.4	9.0	20.1	145.2	127.2	-	-	-	0.623	39.47
180	AA/AA	14.9	176.4	91	4.3	6.2	9.0	19.0	164.0	146.0	M 10	48	48	0.693	46.37
180	A/A	15.4	177	91	4.3	6.5	9.0	19.6	164.0	146.0	M 10	48	48	0.694	45.15
180		18.8	180	91	5.3	8.0	9.0	23.9	164.0	146.0	M 10	48	48	0.698	37.13
180	O/O	21.3	182	92	6.0	9.0	9.0	27.1	164.0	146.0	M 10	50	50	0.705	33.12
200	AA/AA	18.0	196.4	100	4.5	6.7	12.0	22.9	183.0	159.0	M 10	54	58	0.763	42.51
200	A/A	18.4	197	100	4.5	7.0	12.0	23.5	183.0	159.0	M 10	54	58	0.764	41.49
200		22.4	200	100	5.6	8.5	12.0	28.5	183.0	159.0	M 10	54	58	0.768	34.36
200	O/O	25.1	202	102	6.2	9.5	12.0	32.0	183.0	159.0	M 10	56	60	0.779	31.05
220	AA/AA	21.2	216.4	110	4.7	7.4	12.0	27.0	201.6	177.6	M 12	60	62	0.843	39.78
220	A/A	22.2	217	110	5.0	7.7	12.0	28.3	201.6	177.6	M 12	60	62	0.843	38.02
220		26.2	220	110	5.9	9.2	12.0	33.4	201.6	177.6	M 12	60	62	0.848	32.36
220	O/O	29.4	222	112	6.6	10.2	12.0	37.4	201.6	177.6	M 10	58	66	0.858	29.24
240	AA/AA	24.9	236.4	120	4.8	8.0	15.0	31.7	220.4	190.4	M 12	64	68	0.917	36.86
240	A/A	26.2	237	120	5.2	8.3	15.0	33.3	220.4	190.4	M 12	64	68	0.918	35.10
240		30.7	240	120	6.2	9.8	15.0	39.1	220.4	190.4	M 12	66	68	0.922	30.02
240	O/O	34.3	242	122	7.0	10.8	15.0	43.7	220.4	190.4	M 12	66	70	0.932	27.17
270	A/A	30.7	267	135	5.5	8.7	15.0	39.2	249.6	219.6	M 16	70	72	1.037	33.75
270		36.1	270	135	6.6	10.2	15.0	45.9	249.6	219.6	M 16	72	72	1.041	28.86
270	O/O	42.3	274	136	7.5	12.2	15.0	53.8	249.6	219.6	M 16	72	72	1.051	24.88
300	A/A	36.5	297	150	6.1	9.2	15.0	46.5	278.6	248.6	M 16	72	86	1.156	31.65
300		42.2	300	150	7.1	10.7	15.0	53.8	278.6	248.6	M 16	72	86	1.160	27.46
300	O/O	49.3	304	152	8.0	12.7	15.0	62.8	278.6	248.6	M 16	74	88	1.174	23.81
330	A/A	43.0	327	160	6.5	10.0	18.0	54.7	307.0	271.0	M 16	78	96	1.250	29.09
330		49.1	330	160	7.5	11.5	18.0	62.6	307.0	271.0	M 16	78	96	1.254	25.52
330	O/O	57.0	334	162	8.5	13.5	18.0	72.6	307.0	271.0	M 16	80	98	1.268	22.24
360	A/A	50.2	357.6	170	6.6	11.5	18.0	64.0	334.6	298.6	M 22	86	88	1.351	26.91
360		57.1	360	170	8.0	12.7	18.0	72.7	334.6	298.6	M 22	88	88	1.353	23.70
360	O/O	66.0	364	172	9.2	14.7	18.0	84.1	334.6	298.6	M 22	90	90	1.367	20.69
400	A/A	57.4	397	180	7.0	12.0	21.0	73.1	373.0	331.0	M 22	94	98	1.464	25.51
400		66.3	400	180	8.6	13.5	21.0	84.5	373.0	331.0	M 22	96	98	1.467	22.12
400	O/O	75.7	404	182	9.7	15.5	21.0	96.4	373.0	331.0	M 22	96	100	1.481	19.57
450	A/A	67.2	447	190	7.6	13.1	21.0	85.6	420.8	378.8	M 24	100	102	1.603	23.87
450		77.6	450	190	9.4	14.6	21.0	98.8	420.8	378.8	M 24	100	102	1.605	20.69
450	O/O	92.4	456	192	11.0	17.6	21.0	118	420.8	378.8	M 24	102	104	1.622	17.56
500	A/A	79.4	497	200	8.4	14.5	21.0	101	468.0	426.0	M 24	100	112	1.741	21.94
500		90.7	500	200	10.2	16.0	21.0	116	468.0	426.0	M 24	102	112	1.744	19.23
500	O/O	107	506	202	12.0	19.0	21.0	137	468.0	426.0	M 24	104	114	1.76	16.4
550	A/A	92.1	547	210	9.0	15.7	24.0	117	515.6	467.6	M 24	106	122	1.875	20.36
550		106	550	210	11.1	17.2	24.0	134	515.6	467.6	M 24	110	122	1.877	17.78
550	O/O	123	556	212	12.7	20.2	24.0	156	515.6	467.6	M 24	110	122	1.893	15.45
600	A/A	108	597	220	9.8	17.5	24.0	137	562.0	514.0	M 27	114	118	2.013	18.72
600		122	600	220	12.0	19.0	24.0	156	562.0	514.0	M 27	116	118	2.015	16.45
600	O/O	154	610	224	15.0	24.0	24.0	197	562.0	514.0	M 27	118	122	2.045	13.24
750 x 137		137	753	263	11.5	17.0	17.0	175	719.0	685.0	M 27	102	162	2.506	18.28
750 x 147		147	753	265	13.2	17.0	17.0	188	719.0	685.0	M 27	104	164	2.51	17.06
750 x 173	+	173	762	267	14.4	21.6	17.0	221	718.8	684.8	M 27	104	166	2.534	14.58
750 x 196	+	196	770	268	15.6	25.4	17.0	251	719.2	685.2	M 27	106	166	2.552	12.96

European Standard Tapered Flange Beams (IPN/INP)

IPN (or INP) beams are produced with a 14% slope on the inner flange surfaces according to EN 10025. This traditional profile is essential for specific engineering tasks in mechanical engineering and bridge construction. They provide high stiffness in joints where flange width is restricted, often serving as a robust solution for reinforcing older structures.

The range IPN (or INP) beams according to EN 10025

Size	Index	Mass (G), kg/m	Height (h), mm	Width (b), mm	Web (tw), mm	Flange (tf), mm	Radius (r1), mm	Radius (r2), mm	Area (A), mm2x10²	d, mm	Bolt (Ø)	pmin, mm	pmax, mm	AL, m2/m	AG, m2/t
80	-	5.94	80	42	3.9	5.9	3.9	2.3	7.57	59	-	-	-	0.304	51.09
100	-	8.34	100	50	4.5	6.8	4.5	2.7	10.6	75.7	-	-	-	0.370	44.47
120	-	11.1	120	58	5.1	7.7	5.1	3.1	14.2	92.4	-	-	-	0.439	39.38
140	-	14.3	140	66	5.7	8.6	5.7	3.4	18.2	109.1	-	-	-	0.502	34.94
160	-	17.9	160	74	6.3	9.5	6.3	3.8	22.8	125.8	-	-	-	0.575	32.13
180	-	21.9	180	82	6.9	10.4	6.9	4.1	27.9	142.4	-	-	-	0.640	29.22
200	-	26.2	200	90	7.5	11.3	7.5	4.5	33.4	159.1	-	-	-	0.709	27.04
220	-	31.1	220	98	8.1	12.2	8.1	4.9	39.5	175.8	M 10	50	56	0.775	24.99
240	-	36.2	240	106	8.7	13.1	8.7	5.2	46.1	192.5	M 10	54	60	0.844	23.32
260	-	41.9	260	113	9.4	14.1	9.4	5.6	53.3	208.9	M 12	62	62	0.906	21.65
280	-	47.9	280	119	10.1	15.2	10.1	6.1	61.0	225.1	M 12	68	68	0.966	20.17
300	-	54.2	300	125	10.8	16.2	10.8	6.5	69.0	241.6	M 12	70	74	1.03	19.02
320	-	61.0	320	131	11.5	17.3	11.5	6.9	77.7	257.9	M 12	70	80	1.09	17.87
340	-	68.0	340	137	12.2	18.3	12.2	7.3	86.7	274.3	M 12	78	86	1.15	16.90
360	-	76.1	360	143	13	19.5	13	7.8	97.0	290.2	M 12	78	92	1.21	15.89
380	-	84.0	380	149	13.7	20.5	13.7	8.2	107	306.7	M 16	84	86	1.27	15.12
400	-	92.4	400	155	14.4	21.6	14.4	8.6	118	322.9	M 16	86	92	1.33	14.36
450	-	115	450	170	16.2	24.3	16.2	9.7	147	363.6	M 16	92	106	1.48	12.83
500	-	141	500	185	18	27	18	10.8	179	404.3	M 20	102	110	1.63	11.60
550	-	166	550	200	19	30	19	11.9	212	445.6	M 22	112	118	1.80	10.80
600	-	199	600	215	21.6	32.4	21.6	13	254	485.8	M 24	126	128	1.92	9.89

FAQ

UTMK experts answer your questions

Who supplies structural I-beams reliably?

UTMK metal center ensures a resilient supply chain of structural I-beams (such as HEA/HEB 100-500 in S235JR/S355J2 grades per EN 10025) to maintain continuous project operations.

Do your steel beams have compliance certificates?

All rolled products, including standard and wide-flange beams (IPE, INP, HEA), are supplied with full technical documentation confirming compliance with EN or GOST standards.

What size steel beam for a home extension?

For residential extensions and garage roofs, structural engineers typically specify standard IPE 10-16 beams or HEA 100 profiles, providing optimal load-bearing capacity.

Can you cut steel beams to exact length?

Yes, UTMK facilities provide high-precision gas and plasma cutting services. Beams are processed to exact project dimensions before delivery, minimizing on-site waste.

Наверх

Metal service center network across Europe

Select parameters

I-beam HEA HEB IPE IPN S235/S275/S355 EN 10025

Buy Structural Steel I-Beams at a Competitive Price

Purchase I-beams according to GOST 27772-2015, GOST 19425-74, GOST 26020.

Steel I-Beams with Sloped Inner Flanges (GOST 8239-89)

Special Steel I-Beams (GOST 19425-74)

Hot-Rolled I-Beams with Parallel Flange Edges (GOST 26020-83)

European Wide-Flange I-Beams (HEA)

European Standard I-Beams (IPE 60 - 600)

European Standard Tapered Flange Beams (IPN/INP)

FAQ

Steel supply Kiev - Head office

Steel supply in Poltava

Steel supply in Dnipro

Steel supply Kiev

Steel supply in Boryspil

Steel supply in Chernivtsi

Steel supply in Zaporozhye

Steel supply in Kherson

Steel supply in Odessa

Steel supply in Cherkassy

Steel supply in Warszawa: profile pipes, welded pipes, seamless pipes, boo pipes, galvanized pipes.

Steel supply in Sofia