Steel pipe reducers EN10253 (DIN 2616)

Buy Steel pipe reducers EN10253 (DIN 2616) at a Bargain Price in Poland or Bulgaria

Steel pipe reducer is a connecting metal part, which is used if it is necessary to combine pipes of different diameters. This is realized due to the difference in the cross-sectional diameters of its ends. It is indispensable in cases when, when laying a pipeline, it becomes necessary either to increase the pressure of the working medium (switch from a larger diameter pipe to a smaller one), or reduce it (switch from a smaller diameter to a larger one). Such reducers allow to evenly distribute loads in different sections of the pipeline, which significantly reduces the risk of emergencies or rapid wear of the pipeline itself.

Depending on the material of the pipes (steel, cast iron, plastic) laid in the system, appropriate reducers made of the same material are selected. This allows to evenly distribute the mechanical and / or chemical effect of the working medium in all sections of the pipeline. The same principle should be followed when choosing a reducer for steel pipelines - the steel grades from which the reducers are made and the pipes must correspond to each other.

There are two types of reducers:

• with the symbol K - concentric;
• with the symbol E - eccentric.

Seamless steel concentric reducers are used for smooth change of the pipeline diameter along the central axis of symmetry of the pipeline, eccentric - are used for smooth change of the pipeline diameter along the lower generatrix line. Concentric are used when laying both horizontal and vertical pipelines. Eccentric are more often used in oil pipelines, gas pipelines, as well as pipelines of energy and chemical industry enterprises laid horizontally.

It is important to note that the choice of a metal seamless reducer, as well as a pipe, for a main, oil and gas, water supply, gas pipeline - is a guarantee of uninterrupted operation of the system and minimization of risks of emergencies. Therefore, as with any other part, the purchase of a reducer must be treated extremely responsibly. Our company has been a supplier of pipeline valves for more than a year, so we will be happy to help buy steel reducers for pipes in bulk. At the moment, the catalog is represented by seamless steel concentric reducers made of steel S235 / St 35.8. The quality fully complies with the standards prescribed in EN10253 (DIN 2616). Conditional pass (DN) varies from 26 mm to 426 mm, and a smaller nominal pass from 21 mm to 273 mm. Working pressure (PN) is up to 16 MPa (kgf / cm2) at a temperature from -70 degrees to +450 degrees. You can see the offered assortment by our company below in the table.

Where to order steel pipe reducer in Europe?

By contacting the managers of our company, you are guaranteed to receive not only help in selecting the necessary part, but also detailed advice on the application. Thanks to branches located in Poland, Bulgaria and Ukraine, we will be able to perform the completion, packaging and delivery of any order efficiently and in the shortest possible time.

For comprehensive pipeline assembly and supply chain stability, UTMK offers a full range of ISO-certified fittings. Combine your reducer with a Butt Weld Elbow and Butt Weld Tee for precise network configuration. To complete the installation loop efficiently, ensure you have the compatible Welded Water & Gas Pipe or durable Hot-Finished Seamless Pipe (SMLS). For corrosive environments or upgrading existing systems, consider the Stainless Butt Weld Reducer.