U Profile Section 40x40x2.5 - equal-shelf channel, 40 mm high, 40 mm wide and 2.5 mm thick. Rolled products have rounded corners with an internal rounding radius of 3 mm. It is produced by cold-rolled or hot-rolled method from steel sheets on roll forming equipment according to EN 1993-1-3. As a raw material for the manufacture of U Profile Section 40x40x2.5, steel sheets from ordinary, carbon or high-quality structural steel are used. The weight of one running meter of rolled products is 2.185 kg, in one ton about 457.67 m. Our metal depot offers steel U Profile Section 40x40x2.5 from steel grades S390GD + Z, S350GD + Z, DX51D + Z, S235JR, S355JR. It is released in segments 6 m long. C Profile Section 40x40x2.5 is used most often in construction, namely in the construction of frames for non-critical structures, such as hangars, warehouses, greenhouses and sheds. It is also often used in the reconstruction of various metal structures, when laying communications or water drains. You can buy a steel U Profile Section 40x40x2.5 by leaving a request on our website, by phone or directly at the metal depot of our company in Warsaw, Lodz, Krakow and Poznan. The site indicates the retail price per ton, but our managers will definitely help you with the calculation of the cost per meter. We guarantee good discounts for wholesale buyers.