- Metal rolling
- Carbon Steel
- Bent Profiles
- Cold-Formed Angle
- Cold-Formed Steel Angle Bar 100х100х4 Equal Leg EN 10162
Catalog
-
Carbon Steel
-
Pipe Fittings
-
Stainless steel
-
Special steels
Cold-Formed Steel Angle Bar 100х100х4 Equal Leg EN 10162
Steel grade
S235JR, S355JR
Length/cut
6-12
Standard
DSTU 2254-93, EN 10162
Width, mm
100
Thickness, mm
4
Type
Cold-Formed Angle
Product code
7400001868
Manufacturer
Poland
Seller
UTMK
Height, mm
100
Weight per meter, kg
6.05
Meters per ton
165.29
Execution
Equal Leg
Certification
2.2
| 5.4 | EUR |
| meter | |
| Brutto | |
| 893.2 | EUR |
| ton | |
| Brutto | |
Description
Cold-formed steel angle 100x100x4 is an equal-sided bent profile with an L-shaped cross-section. It has the following parameters: width - 100 mm, thickness - 4 mm. It is produced in accordance with the requirements of DSTU 2254-93 ( acc. EN 10162 cert. 2.2) from structural carbon steel grades St3 / 09G2S (S235JR / S355JR) by cold bending on rolling machines.
This rolled metal product is used for reinforcing concrete, constructing ventilated facades, and decorative purposes. In railcar construction, L-shaped profiles are also used to create frames. They find application in interior finishing and frame installation where significant loads are not a primary factor.
You can order the 100x100x4 angle online on the UTMK website or by phone. Pick-up is available from warehouses in Warsaw, Lodz, Krakow, Poznan, Sofia, Varna, and Plovdiv. Delivery is available throughout the EU. We also deliver lots over one ton throughout the EU.
Contact us for more information. We look forward to working with you.
Popular products
Viewed products
meter
Brutto
ton
Brutto
piece
Brutto
ton
Brutto
sq.m.
Brutto
kg
Brutto
piece
Brutto
ton
Brutto
sq.m.
Brutto
kg
Brutto
-
Carbon Steel
-
Long Products
-
Rolled metal pipe
-
Seamless pipes
-
Steel sheets
-
Bent Profiles
-
Forgings
-
Metal products
-
-
Pipe Fittings
-
Stainless steel
-
Special steels
-
Hardox steel
-
Swebor steel
-
Armored Steel MARS
-
Mobile
Mobile
Для шапки